Neoloy® Tough-Cells Category C is designed for Base Reinforcement of Paved Asphalt Roads and Unpaved Access Roads
Neoloy Tough-Cells Category C is the only Qualified Solution for Access Roads and Asphalt Roads
Neoloy is an ideal geocell reinforcement solution for paved and unpaved roads adopted by leading international companies. Neoloy Tough-Cells stabilize subgrade, reinforce the base and reduce degradation of the surface layer.
Neoloy Tough-Cells Category-C Tough Cells – Sample Case Studies
 |
|
| Unpaved Access Roads
· Access Road from Sand through Desert |
Paved Asphalt Roads |
NOTE: The optimal Neoloy Tough-Cell Category is determined only after PRS evaluates your project requirements and prepares a geotechnical engineering design.
If You want to Build a Durable Road and Lower your Costs– Contact Us NOW
Neoloy Tough-Cell Category-C GeoTechnical Engineering Properties
- Cell Wall Height: 50, 75, 100, 120, 150, 200 mm
- Cell Opening Size (weld distance): 330, 356, 445, 660, 712 mm
- Elastic Stiffness (Dynamic Mechanical Modulus – DMA): > 475-725 MPa (ASTM E2254)
- Permanent Deformation (Creep) – Stepped Isothermal Method (SIM): <3% deformation (creep) = period of 75 years (ASTM D-6992)
- Tensile Strength: 19 kN/m, Perforated (Wide-width) (ISO-10319)
Download Full Neoloy Tough-Cell Category-C GeoTechnical Engineering Specification
Typical GeoTechnical Engineering Road Design Guidelines with Low Modulus Infill
| Application & Infill | Sample Design Requirement | Sample Product Specification |
 |
Gravel Road on Soft Soil
Paved Asphalt Road on Soft Soil (Various infill types) |
PRS-330-120-C in Base Layer PRS-330-150-C in Base Layer
|
Your Success Starts Here. Submit a Design Request to Optimize Costs and Engineering Performance